Geneva, Switzerland
June 17, 1997
JOINT COMPLIANCE AND INSPECTION COMMISSION
JOINT STATEMENT NUMBER S-4ON CHANGES TO THE BOUNDARY OF THE
HILL REPAIR FACILITY FOR ICBMSThe Parties, referring to paragraph 20 of Annex J to the Memorandum of Understanding on the Establishment of the Data Base Relating to the Treaty Between the United States of America and the Union of the Soviet Socialist Republics on the Reduction and Limitation of Strategic Offensive Arms of July 31, 1991, hereinafter referred to as the Treaty, agree on the following:
(1) The new boundary of the Hill Repair Facility for ICBMs shall be the boundaries shown on the site diagrams of the repair facility dated March 1, 1996, Area 2 of the repair facility dated March 1, 1996, and Area 3 of the repair facility dated March 1, 1996, which is attached to this Joint Statement, and the boundary shown on the site diagram of Area 1 of the repair facility, which is unchanged.1
(2) The portions of the Hill Repair Facility for ICBMs to be excluded, pursuant to this Joint Statement, from within the boundary shown on the site diagrams of the repair facility dated December 6, 1991, Area 2 of the repair facility dated December 6, 1991, and Area 3 of the repair facility dated December 6, 1991, shall not be subject to inspection unless such portions are included within the boundary of any inspection site.
(3) The changes to the boundary of the Hill Repair Facility for ICBMs shall become effective on the date specified in the notification provided by the United States of America in accordance with paragraph 19 of Section I of the Protocol on Notifications Relating to the Treaty, or the date such notification is provided by the United States of America, or the date of entry into force of this Joint Statement, whichever is latest.
[Initialled]
(United States of America)___Steven Steiner
(Republic of Belarus)___Stanislav Ogurtsov
(Republic of Kazakstan)___Kairtay Zhanbatyrov
(Russian Federation)___Anton Vasil'yev
(Ukraine)___Konstantin Hrishchenko
1 Attachment is classified and therefore is not included in this publication.