| JOINT COMPLIANCE AND INSPECTION COMMISSION AGREEMENT NUMBER 29
 RELATING TO THE TREATY BETWEEN
 THE UNITED STATES OF AMERICA AND
 THE UNION OF SOVIET SOCIALIST REPUBLICS ON
 THE REDUCTION AND LIMITATION OF STRATEGIC OFFENSIVE ARMS
 OF JULY 31, 1991
  
          CHANGES TO BOUNDARIES ON SITE DIAGRAMS OF FACILITIES  The Governments of the Parties to the Treaty Between the United States 
          of America and the Union of Soviet Socialist Republics on the Reduction 
          and Limitation of Strategic Offensive Arms of July 31, 1991, hereinafter 
          referred to as the Treaty,
          
          Acting in accordance with the Treaty,
          
          To improve the viability and effectiveness of the Memorandum of Understanding 
          on the Establishment of the Data Base Relating to the Treaty, hereinafter 
          referred to as the Memorandum of Understanding,
          
          To improve the viability and effectiveness of the Protocol on Notifications 
          Relating to the Treaty, hereinafter referred to as the Notification 
          Protocol,
          
          Have agreed as follows:
          
          
          
         
        Article One 
         
          The following provisions shall constitute paragraphs 19, 20, and 21 
          of Annex J to the Memorandum of Understanding:
          
          
         
          "19. For each change to the boundary of a facility shown on the existing 
          site diagram of the facility provided pursuant to this Memorandum that 
          would result in the exclusion from within such boundary of any structure 
          that was shown within such boundary pursuant to subparagraph 9(b)(iii) 
          of this Annex, the change shall become effective after the following 
          requirements are met:
           
            
           
            (a) the provisions of paragraph 2 of Section IX of the Conversion 
            or Elimination Protocol have been met with respect to the portions 
            of the facility to be excluded from within the boundary of the facility;
             
              (b) for all structures that were shown on the existing site diagram 
              pursuant to subparagraph 9(b)(iii) of this Annex and that would 
              be excluded from within the boundary of the facility, information 
              has been provided by the Party changing the boundary of the facility, 
              within the framework of the Joint Compliance and Inspection Commission 
              or through diplomatic channels, on its intent with regard to: 
              
              
             
              (i) the structures that will remain unchanged but which that Party 
              declares will no longer be used for items of inspection; 
               (ii) the structures that will be destroyed; 
                (iii) the structures that will be converted in a manner so that 
                they are not large enough to contain items of inspection or their 
                entrances are not large enough to permit passage of items of inspection; 
                and
                (iv) the approximate effective date of the change;
               
              (c) agreement has been reached, within the framework of the Joint 
              Compliance and Inspection Commission, on: 
              
              
             
              (i) the new boundary of the facility; and
               (ii) inspections of portions of the facility to be excluded 
                from within the boundary of the facility. The procedures for such 
                inspections shall be agreed taking into account the plans specified 
                pursuant to subparagraph (b) of this paragraph for each structure, 
                including its possible destruction or conversion. Such procedures 
                and plans shall be recorded in the agreement reached pursuant 
                to this subparagraph. Unless otherwise agreed, the procedures 
                for such inspections shall be based on the provisions contained 
                in, as applicable, Sections XII and XIII of the Inspection Protocol; 
                and
               
              (d) a notification has been provided in accordance with paragraph 
              19 of Section I of the Notification Protocol.
             
            20. For each change to the boundary of a facility shown on the existing 
            site diagram of the facility provided pursuant to this Memorandum 
            that would not result in the exclusion from within such boundary of 
            any structure that was shown within such boundary pursuant to subparagraph 
            9 (b) (iii) of this Annex, the change shall become effective after 
            the following requirements are met:
            
            
           
            (a) agreement has been reached, within the framework of the Joint 
            Compliance and Inspection Commission, on:
             
              
             
              (i) the new boundary of the facility; and
               (ii) inspection of portions of the facility to be excluded from 
                within the boundary of the facility. Unless otherwise agreed, 
                the procedures for such inspection shall be based on the provisions 
                contained in Section XII of the Inspection Protocol; 
               
              (b) information has been provided by the Party changing the boundary 
              of the facility on the approximate effective date of the change; 
              and
              
              (c) a notification has been provided in accordance with paragraph 
              19 of Section I of the Notification Protocol.
             
            21. For each change to the boundary of a facility shown on the existing 
            site diagram of the facility provided pursuant to this Memorandum 
            that would not result in the exclusion of any portion of the existing 
            inspection site from within such boundary, the change shall become 
            effective on the date specified in the notification of the change 
            to such boundary provided in accordance with paragraph 19 of Section 
            I of the Notification Protocol."
           
          
          
         
        Article Two 
         
          The following provisions shall constitute paragraph 19 of Section 
          I of the Notification Protocol:
          
          
         
          "(19) notification, no later than five days after the effective date 
          of a change, of the change to the boundary of the facility specified 
          on the site diagram. Such notification shall include: the name and function 
          of the facility; the subtitle, if applicable; the geographic coordinates 
          of the facility; the effective date of the change; the reference to 
          the Joint Compliance and Inspection Commission document; and a statement 
          that a revised site diagram for the facility and a site diagram of excluded 
          portions of the facility will be provided through diplomatic channels 
          no later than 48 hours after the notification provided for in this paragraph."
           
           
          
          
          
         
        Article Three 
         
          The following categories of data shall be added in Annex E to the 
          Memorandum of Understanding:
          
          
         
          "For each Party, the facilities currently or formerly declared in this 
          Memorandum whose portions have been excluded, in accordance with paragraph 
          19 or 20 of Annex J to this Memorandum, for the purposes of the Treaty 
          from within the boundaries shown on the site diagrams of such facilities, 
          and notification of changes in the boundaries of which have been provided 
          in accordance with paragraph 19 of Section I of the Notification Protocol, 
          are as follows:
          Article Four 
            
           
            (a) United States of America
             
             
              Function of the facility that incorporated excluded portions:(__________)
  
              Name of the facility that incorporated excluded portions and subtitle, if applicable/Location of
 the facility: (____ )/( ____ )
 
  Date of preparation of the site diagram ofexcluded portions of the facility:
 (__________)
  
              Reference to Joint Compliance and InspectionCommission Document on the exclusion of portions
 of a facility:
 (__________)
  
              
              
             (b) Republic of Belarus
              
             
              Function of the facility that incorporated excluded portions:(__________)
  
              Name of the facility that incorporated excludedportions and subtitle, if applicable/Location of
 the facility: (____ )/( ____ )
  
              Date of preparation of the site diagram ofexcluded portions of the facility:
 (__________)
  
              Reference to Joint Compliance and InspectionCommission Document on the exclusion of portions
 of a facility:
 (__________)
  
              
             (c) Republic of Kazakhstan
              
             
              Function of the facility that incorporated excluded portions:(__________)
  
              Name of the facility that incorporated excludedportions and subtitle, if applicable/Location of
 the facility: (____ )/( ____ )
  Date of preparation of the site diagram ofexcluded portions of the facility:
 (__________)
  
              Reference to Joint Compliance and InspectionCommission Document on the exclusion of portions
 of a facility:
 (__________)
  
              
              
             (d) Russian Federation
              
             
              Function of the facility that incorporated excluded portions:(__________)
  
              Name of the facility that incorporated excludedportions and subtitle, if applicable/Location of
 the facility: (____ )/( ____ )
  
              Date of preparation of the site diagram ofexcluded portions of the facility:
 (__________)
  
              Reference to Joint Compliance and InspectionCommission Document on the exclusion of portions
 of a facility:
 (__________)
  
              
              
             (e) Ukraine
              
             
              Function of the facility that incorporated excluded portions:(__________)
  
              Name of the facility that incorporated excludedportions and subtitle, if applicable/Location of
 the facility: (____ )/( ____ )
  
              Date of preparation of the site diagram ofexcluded portions of the facility:
 (__________)
  
              Reference to Joint Compliance and InspectionCommission Document on the exclusion of portions
 of a facility:
 (__________)
  
             
           
         
          l. This Agreement shall enter into force on the date when the United 
          States of America, the Republic of Belarus, the Republic of Kazakhstan, 
          the Russian Federation, and Ukraine have consented to be bound by this 
          Agreement, and shall remain in force as long as the Treaty remains in 
          force.
          
          2. Signature of this Agreement for the Government of a Party shall 
          express the consent of that Party to be bound by this Agreement. The 
          consent of Ukraine to be bound by this Agreement shall be expressed 
          by its Government in accordance with paragraph 6 of Annex 1 to the Protocol 
          on the Joint Compliance and Inspection Commission Relating to the Treaty. 
          
          
          IN WITNESS WHEREOF the undersigned, being duly authorized by their 
          respective Governments, have signed this Agreement. 
          
          DONE at Geneva on February 3, 1995, in five copies, each in the English 
          and Russian languages, both texts being equally authentic.
          
          
          FOR THE GOVERNMENT OF THE UNITED STATES OF AMERICA:Steven Steiner
  
          FOR THE GOVERNMENT OF THE REPUBLIC OF BELARUS:Aleksandr Baichorov
  
          FOR THE GOVERNMENT OF THE REPUBLIC OF KAZAKHSTAN:Kairtay Zhanbatyrov
  
          FOR THE GOVERNMENT OF THE RUSSIAN FEDERATION:Mikhail Strel'tsov
 
  
       |